|
| |
TM 5-4210-230-14&P-1
VEHICLE MAINTENANCE
HEADLIGHT REMOVAL
1.
Remove the headlight rim retaining screw at the bottom
of the headlight body and remove the rim.
2.
Unhook the headlight retaining spring from the
headlight retainer, or remove the headlight rim
retaining screw.
3.
Remove the sealed-beam unit from the headlight and
disconnect the three-way connector at the rear. Hold
the three-way connector firmly to avoid damage to the
wiring. Remove the headlight retainer from the sealed
beam unit.
All IH Dealers include in their service tools, equipment
scientifically developed for aiming headlight beams. The use
of this equipment will result in maximum illumination for night
driving and assure that the headlight aiming does not conflict
with existing laws and regulations. It is good practice to avail
yourself of this service when a sealed-beam unit has been
replaced or the headlight beam pattern does not give
adequate illumination.
PARKING LIGHTS
The parking lights are equipped with ordinary filament
bulbs. Should it become necessary to replace either a parking
light lens or bulb, remove the lens retaining screws, replace
the necessary parts and reassemble.
SPARK PLUGS-GASOLINE ENGINES
For spark plug change intervals, refer to Emissions
Manual.
8
|
