|
| |
TM5-4210-229-14&P
6-15.
TRANSMISSION REPAIR (Continued).
(f) Remove the snapring (263) that retains the
front planetary ring gear (264). Remove
the ring gear (264) from the planetary
connecting drum (265).
(g) Lift
out
the
center
planetary
carrier
assembly (266).
(h) Remove the main shaft (267) and its
attached
parts,
from
the
planetary
connecting drum (265).
(i) Remove thrust washer (268) from shaft
(269) or from the front of shaft (270).
(j) Remove the spiral snapring (271) that
retains the rear planetary sun gear (272)
on the main shaft (269).
Remove the main shaft (269). Remove
orifice (273) from shaft (269) only if
replacement is necessary.
(k) Remove
snapring
(274)
from
rear
planetary sun gear (272). Remove gear
(272) from center planetary ring gear
(275).
(l) Position the remaining assembly so that
the planetary connecting drum (265) is
downward, and remove the snapring (276)
that retains the rear planetary carrier
assembly (277). Lift the carrier assembly,
and output shaft, out of the drum.
(m) Tap output shaft assembly (278) forward,
toward carrier assembly (277), until ball
bearing (279) is lightly pinched between
spring pin (280) and carrier assembly
(277).
6-74
|
