|
| |
TM5-4210-229-14&P
5-11.
ENGINE REPLACEMENT (Continued).
REMOVAL
a.
Remove crankcase ventilation tube (1), oil cooler
(2), pressure regulator valve (3), turbocharger oil
return elbow (4) and oil filter base (5) with filters (6)
from crankcase (7).
Make sure safety catch on hoist hook functions
properly.
When lifting an object, make sure the hoist and
sling are fastened securely. Be sure the item
being lifted does not exceed the capacity of the
lifting device.
b.
Position engine lifting device and carefully remove
the engine from the vehicle.
c.
Hoist the engine to the engine stand. Insert a 2x4
inch board (Appendix D, Item 4) of appropriate
length between the ends of the lifting chains as
shown. This will prevent the possibility of the lifting
eyes turning and damaging the rocker arm cover.
INSTALLATION
When lifting an object, make sure the hoist and
sling are fastened securely. Be sure the item
being lifted does not exceed the capacity of the
lifting device.
a.
Position engine lifting device and carefully install
the engine into the vehicle.
b.
Install oil filters (6) with base (5) on crankcase (7).
c.
Install turbocharger oil return elbow (4), pressure
regulator valve (3), oil cooler (2) and crankcase
ventilation tube (1).
d.
Install engine mounting bolts (paragraph 5-14).
e.
Install power steering pump (paragraph 4-183).
f.
Install transmission (paragraph 4-156).
g.
Install engine wiring (paragraph 4-148).
5-26
|
