|
| |
TM5-4210-229-14&P
4-147. CAB ELECTRICAL SYSTEM REPLACEMENT (Continued).
INSTALLATION
a. Position new wiring harness in vehicle and re-
connect the various branch circuits and sockets.
b. Insert harness in retaining clips and secure by
bending or securing clips back into position.
c. Reconnect the batteries.
4-148. CHASSIS ELECTRICAL SYSTEM REPLATEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SET-UP
Tools
General Safety Instructions
General Mechanics Tool Kit
Engine OFF.
Transmission in (N) neutral
Parking brake set.
Batteries disconnected
REMOVAL
a. Locate the harness which is being replaced and
remove by bending or cutting open the various
clips retaining the harness.
b. Disconnect the harness from the sockets and
various branch circuits.
c. Remove harness.
a. Battery Charging System
INSTALLATION
a. Position new wiring harness in vehicle and re-
connect the various branch circuits and
sockets.
c. Insert harness in retaining clips and secure by
bending or securing clips back into position.
c. Reconnect the batteries.
14. Battery
75. wire, 12, Harness "G"
76. Plug, Charging
77. wire, 10, Harness "F"
78. wire, 11,Harness"F"
79. Cable Ground, 21, Harness "P"
4-159
|
