|
| |
TM5-4210-299-14&P
4-127. SPLASH GUARD/MUD FLAP REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SET-UP
Tools
General Safety Instructions
General Mechanics Tool Kit
Engine OFF.
Transmission in (N) neutral
Materials/Parts
Parking brake set.
Splash Guard/Mud Flap Right (583960C1)
Splash Guard/Mud Flap Left (583959C1)
REMOVAL
a. Remove pin (1) and lift up front end of splash
guard/mud flap (2).
b. Slide ends (3) of flap (2) out of brackets.
c. Remove splash guard/mud flap (2).
d. Remove the three nuts (4) from the bolts (5)
that hold the rubber mud deflector flap (6)
between the bracket (7) and the reinforcement
plate (8).
e. Remove the reinforcement plate (8) off the bolts (5).
f. Remove mud flap (6) and bolts (5).
INSTALLATION
a. Slide ends (3) of flap (2) into brackets.
b. Lower front end of splash guard/mud flap (2) and
install pin (1).
c. Position mud flap (6) and align bolt holes (9) on the
bracket (7).
d. Position the reinforcement plate (8) and install the
three bolts through the bracket (7),mudflap (6) and
reinforcement plate (8).
e. Install nuts (4) on the reinforcement plate side (8) and
torque nuts (4) to 8 ft-lb (10.8 N.m).
4-139
|
