|
| |
TM 5-4210-229-14&P
4-121. TURN SIGNAL SWITCH REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP
Tools
General Mechanics Tool Kit
Materials/Parts
Switch (471302C93)
Equipment Condition
Para. Condition Description
4-118 Steering Wheel Removed
General Safety Instructions
Engine OFF.
Transmission in (N) neutral.
Parking brake set.
Batteries disconnected.
REMOVAL
a. Remove steering column housing cover (1).
b. Remove cancelling pin (2) and retainer and slip
ring assembly (3).
c. Remove two bushings (4) and washer (5).
d. Remove two screws (6) from turn signal switch
(7).
e. Disconnect electrical plug (8) from turn signal
switch (7). Remove turn signal switch.
INSTALLATION
a. Position turn signal switch (7) on steering column
and secure with two screws (6).
b. Connect electrical plug (8) to turn signal switch
(7).
c. Install two bushings (4) and washer (5).
d. Install retainer and slip ring assembly (3) and
cancelling pin (2).
e. Install steering column housing cover (1).
f. Install steering wheel (paragraph 4-118).
g. Connect battery cables.
4-133
|
