|
| |
TM 5-4210-229-14&P
4-118. STEERING WHEEL REPLACEMENT (Continued).
c. Remove the steering wheel mounting nut (3).
d. Remove steering wheel (4) using steering wheel
puller.
INSTALLATION
a. Install the steering wheel (4) with the narrow
spoke (with the word TOP) at the 12 o'clock
position. Install the steering wheel mounting nut
(3) and torque to 75-80 ft-lb (102- 108 N.m).
b. Install the retainer ring (2).
c. Connect the horn wire to the horn button (I) and
install the horn button.
d. Connect battery cables.
4-119. STEERING COLUMN REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP
Tools
General Mechanics Tool Kit
Materials/Parts
Steering Column (489574C91)
Equipment Condition
Para. Condition Description
4-118 Steering Wheel Removed
General Safety Instructions
Engine OFF.
Transmission in (N) neutral.
Parking brake set.
Batteries disconnected.
REMOVAL
NOTE
Install the steering wheel mounting nut
(3) to prevent the steering column from
sliding out of the steering column
housing.
a. Remove the pinch bolt (1) from the yoke (2) at
the steering gear.
b. Remove five screws and steering column trim
cover (4).
c. Remove the electrical connectors and wiring
from the steering column housing (5).
d. Remove the three screws (6) attaching the
steering column rubber seal (7) to the floor
panel.
e. Remove the four bolts, washers and nuts (8)
attaching the steering column housing (5) to the
steering column support bracket (9). Tilt the
steering column assembly to the side and re-
move it from the vehicle.
4-130
|
