|
| |
TM 5-4210-229-14&P
4-102. WINDSHIELD WASHER/WIPER ASSEMBLY SERVICE.
This task covers:
Service
INITIAL SETUP
Materials/Parts
Windshield Washer Fluid (Appendix D, Item 56)
SERVICE
a. Check level of fluid in reservoir and inspect reservoir for signs of dirt. Flush with clean water and refill reservoir if
dirt is present.
b. Refill with windshield washer fluid (Appendix D, Item 56).
4-103. WIPERS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Materials/Parts
General Mechanics
Wiper Blade (475925C1)
Wiper Arm, Streetside (508915C1)
Wiper Arm, Curbside (475924C91)
REMOVAL
a. Pull outer end of arm (1) away from the
windshield which will trip lock spring at base of
arm and release spring from pivot shaft (2).
b. Pull outward on cap section (3) at base of arm.
c. Remove wiper arm (1).
d. Replace wiper blades (4) as necessary.
INSTALLATION
a. Position cap section (3) on pivot shaft (2) and
push downward on arm to set wiper arm.
b. Push outer end of arm (1) toward glass to set into
position for operation.
c. Adjust wiper arm on windshield.
4-116
|
