|
| |
TM5-4210-229-14&P
4-35. CONTROLS AND GAUGES REPLACEMENT (Continued).
REMOVAL
a. Pressure gauge removal.
NOTE
This procedure is typical for all pressure gauges.
(1) Remove five screws (1) and two nuts (2) se-
curing control panel (3) to roof turret assembly.
Remove panel.
(2) Remove two nuts (4) and bolts (5).
(3) Unscrew gauge (6) from fitting (7).
b.
Cab control handle removal.
(1) Remove two retaining pins (1).
(2) Remove handle (2) from control assembly (3).
INSTALLATION
a.
Pressure gauge installation.
NOTE
This procedure is typical for all pressure gauges.
(1) Screw gauge (6) into fitting (7).
(2) Position gauge onto control panel and secure
with two bolts (5) and nuts (4).
(3) Position control panel (3) on roof turret assem-
bly and secure with five screws (1) and two
nuts (2).
(4) Pressurize the system (paragraphs 2-24 or
2-5).
b.
Cab control handle installation.
(1) Position handle (2) into the control assembly
(3).
(2) Secure using the two retaining pins (1).
4-50
|
