|
| |
TM5-4210-229-14&P
4-32. REMOTE MANUAL TWIN AGENT TURRET ASSEMBLY REPLACEMENT (Continued).
REMOVAL
a.
Remove five screws (1) and two nuts (2) securing
turret control panel (3) to turret assembly.
b.
Tag and disconnect control wires to the panel light
(4) and solenoids (5).
c.
Remove four nuts (6), washers (7) and bolts (8)
securing rear plate (9) to roof.
When lifting an object, make sure the hoist
and sling are fastened securely. Be sure
the item being lifted does not exceed the
capacity of the lifting device.
d.
Secure hoist and sling to turret assembly.
e.
Remove twelve nuts (10), lockwashers (11), wash-
ers (12), and bolts (13) securing turret assembly to
the cab roof.
f.
Remove turret, assembly retaining bars (1 4) and
remove turret.
INSTALLATION
When lifting an object, make sure the hoist
and sling are fastened securely. Be sure
the item being lifted does not exceed the
capacity of the lifting device.
a.
Position turret assembly on cab roof and secure
with retaining bars (14), twelve bolts (13), washers
(12), lockwashers (11), and nuts (10).
b.
Remove hoist and sling.
c.
Position rear plate (9) on roof and secure with four
bolts (8), washers (7) and nuts (6).
d.
Reconnect control wires to the panel light (4) and
solenoids (5).
e.
Position turret control panel (3) to turret assembly
and secure with five screws (1) and two nuts (2).
f.
Reconnect
roof
warning
light
control
wire
(paragraph 4-100)..
g.
Reconnect hoses (paragraph 4-28).
h.
Pressurize the system (paragraphs 2-24 or 2-25).
4-47
|
