EXPLANATION OF COLUMNS

TM5-4210-224-14&P

E-3. EXPLANATION OF COLUMNS (Continued).

f. Qt . Inc. in Unit (Column 7). The Quantity Incorporated in Unit (QTY INC IN UNIT) indicates the quantity

of the item used in the breakout shown on the illustration figure, which is prepared for a functional group,

subfunctional group, or an assembly. An "AR" appearing in this column in lieu of a quantity indicates that

no specific quantity is applicable (e.g., shim, spacers).

E-4. HOW TO LOCATE REPAIR PARTS.

a. First: Using the table of contents, determine the functional group to which the item belongs. This is necessary

since figures are prepared for functional groups and listings are divided into the same groups following the order

of the MAC chart.

b. Second Find the figure covering the functional group or subfunctional group to which the item belongs.

c. Third: Identify the item on the figure and note the item number of the item.

d. Fourth: Refer to the Repair Parts List for the figure to find the line item entry for the item number noted on the

figure.

E-5. ABBREVIATIONS.

As Required

NSS

Not Sold/Serviced Separately

GPM

Gallons Per Minute

P/N

Part Number

Left Hand

psi

pounds per square inch

max

maximum

qty

quantity

mifg

manufacturing

Right Hand

min

minimum or minute

rpm

revolutions per minute

No.

number(s)

U/M

Unit of Measure

wt.

Weight

E-6. MANUFACTURER'S CODE.

The following is a listing of vendor codes with names and addresses of suppliers; vendor parts are listed in this

publication. The codes are arranged in numerical order, followed by an alphabetical listing of same.

E-2