Table 5-1. Direct Support Troubleshooting Chart - continued

TM 5-4210-224-14&P

Table 5-1. Direct Support Troubleshooting Chart (Continued).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

CLUTCH ASSEMBLY

9. CLUTCH WILL NOT DISENGAGE.

Step 1. Check for air in the hydraulic system.

Bleed system and check for damage (paragraph 4-195).

Step 2. Check for proper clutch pedal travel.

Adjust clutch linkage (paragraph 4-195).

10. CLUTCH SLIPS.

Check clutch linkage for proper adjustment.

Adjust clutch linkage.

11. CLUTCH GRABS.

Inspect engine mounts for loose or damaged hardware.

Tighten or replace engine mounts (paragraph 5-11).

TRANSFER CASE ASSEMBLY

12. EXCESSIVE NOISE.

Step 1. Check lubricant level.

Fill as required (paragraph 4-9).

Step 2. Inspect yoke bolts for looseness.

Tighten yoke bolts (paragraph 4-200).

Step 3. Inspect adapter bolts for looseness.

Tighten adapter bolts (paragraph 4-200).

13. SHIFT LEVER DIFFICULT TO MOVE.

Perform operational check on shift lever.

Refer to next higher level of maintenance.

5-6