 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-4210-224-14&P
4-203. WHEEL ASSEMBLY REPLACEMENT. (Continued)
(2) Turn the wheel until one nut is at the top
of the bolt circle.
(3) Tighten the nut just snug.
(4) Snug-up the remaining nuts in a criss-
cross pattern.
(5) Torque lugs (1) to 140 ft. lbs.(190 N-m)
evenly and alternatively to avoid
excessive runout.
b. Dual Wheels.
(1) Install inner and outer wheel and clamp
(2) Install lug nuts finger tight.
ring on the rear wheel.
(3) Torque lugs to 140 ft-lbs (190 N.m),
evenly and alternatively to avoid
excessive runout.
NOTE
Be sure the pins on the clamp ring
face outward.
c. Lower the vehicle to the ground.
4-204. LUGS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIALSETUP :
Tools
General Safety Instructions
Jack
Engine OFF.
Lug Wrench
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Materials/Parts
Lugs (As Required)
REMOVAL
a. Using a lug wrench, loosen lugs (1) from wheel
studs.
b. Raise vehicle so that tire is off the ground.
c. Remove the lugs (1) from the wheel.
4-275
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals