|
|
TM 5-4210-224-14&P
4-139. HEATER/DEFROSTER CONTROL CABLE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Mechanics Tool Kit
Equipment Condition
Para. Condition Description
Removed
General Safety Instructions
Engine OFF.
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Batteries disconnected
REMOVAL
a.
Remove the cable push nut retainers(1) and
tab attaching screws (2) from the heater
distributor assembly (3). Raise or lower the
control as necessary.
b.
Remove control cables (4 and 5).
INSTALLATION
CAUTION
Do not kink the cable. Route the
cable as removed and check
adjustment.
a.
Install cable assemblies (4 and 5).
b.
Attach cables to heater distributor assembly
(3) using retainers (1) c.
Install tab
attaching screws (2).
d.
Install heater/defroster controls (paragraph
e.
Reconnect battery cables.
4-190
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |