REMOVAL - TM-5-4210-224-14-P0212

TM 5-4210-224-14&P

4-77. HOSES AND PIPING REPLACEMENT. (Continued).

REMOVAL

a. Remove two clamps (1) on hose (2) from

radiator (3) to heat exchanger (4).

b. Remove hose (2).

c. Remove the clamp (5) from the crossover to the

engine block.

d. Remove the clamp (6) at the block.

e. Remove the hose (7).

f. Remove the clamps (8) from the crossover

assembly to the heater.

g. Remove the heater hose (9).

h. Remove the clamps (10) from the heater to the

radiator (2).

i. Remove the hose (11).

j. Remove the clamps (12) from the block to the

lower portion of the radiator (2).

k. Remove the hose (13).

INSTALLATION

a. Position the clamps (12) on the lower radiator-

d. Position the clamps (6 and 5) on the crossover-

to-block hose and install the hose (13).

to-engine block hose and install the hose (7).

b. Position the clamps (10) on the heater to

e. Position the clamps (1) on the radiator (3) -to-

radiator hose and install the hose (11).

heat exchanger hose and install the hose (2).

c. Position the clamps (8) on the crossover-to-

f. Make certain all connections are tight and

heater hose and install the hose (9).

secure.

4-117