ENGINE THROTTLE CONTROL ASSEMBLY REPLACEMENT.

TM5-4210-224-14& P

4-33. ENGINE THROTTLE CONTROL ASSEMBLY REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General Mechanics Tool Kit

Equipment Condition

Para. Condition Description

4-26 Hose Bed Floors Removed

Materials/Parts

4-27 Hose Rollers Removed

Engine Throttle (VCGTX15)

4-28 Hose Bin Dividers Removed

4-30 Compartment Light Removed

4-31 Roof Panel Removed

General Safety Instructions

Engine OFF

Transmission in (N) neutral.

Parking brake and micro-brakelock set.

Batteries disconnected.

REMOVAL

a. Disconnect throttle cable assembly (1) from back

of throttle control (2) by loosening retaining nut

(3).

b. Remove nut (4), starwasher (5) and pull throttle

control (2) out through front of street side panel.

INSTALLATION

a. Insert throttle control (2) through street side panel.

b. Secure throttle control (2) with starwashers (5),

and nut (4).

NOTE

When connecting throttle cable

assembly to throttle control the

Install roof panel (paragraph 4-31).

cable may slide into the cable

Install compartment light (paragraph 4-30).

assembly. Push on the other end of

Install hose bin dividers (paragraph 4-28).

cable located at the accelerator

Install hose rollers (paragraph 4-27).

linkage in the engine compartment.

Install hose bed floors (paragraph 4-26).

Reconnect batteries.

c. Attach throttle cable (1) to back of throttle control

(2) with retaining nut (3).

4-64