HOSE ROLLERS REPLACEMENT

TM5-4210-224-14&P

4-27. HOSE ROLLERS REPLACEMENT. (Continued)

REMOVAL

NOTE

Hose roller removal procedures for

street side and curb side hose roller

assemblies are identical.

a. Remove two acorn nuts (1), washers (2) and

phillips screws (3).

b. Remove hose roller retaining brackets (4 and 5).

c. Remove vertical hose rollers (6).

d. Remove hex nut (7), washer (8) and bolt (9).

e. Remove hose roller retaining bracket (10) and

remove remaining vertical hose roller (11).

f. Remove hex nut (12), washer (13), and bolt (14).

g. Remove retaining bracket (15) and hose roller

(16).

h. Remove hex nut (17), washer (18), and bolt (19).

i. Remove retaining bracket (20) and hose roller

(21).

INSTALLATION

NOTE

Hose roller installation procedures for street side and curb side hose roller assemblies are

identical.

4-57