 |
|||
|
|
|||
|
Page Title:
Table 4-4. Organizational Troubleshooting Chart - continued |
|
||
| ||||||||||
|
|
 TM5-4210-224-14&P
Table 4-4. Organizational Troubleshooting Chart.(Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3. Inspect for blown fuse.
Replace fuse. If new fuse blows, check for short to ground between fuse panel and lights.
Step 4. Check for defective turn signal flasher.
Replace flasher (paragraph 4-130).
31.
HAZARD WARNING LIGHTS INOPERATIVE.
Step 1. Inspect for loose or burnt out bulbs.
Secure or replace bulbs (paragraph 4-130).
Step 2. Inspect for loose connections.
Tighten connections.
Step 3. Inspect for blown fuse.
Replace fuse. If new fuse blows, check for short to ground between fuse panel and lights.
Step 4. Check for defective warning light flasher.
Replace flasher (paragraph 4-130).
32.
ROOF WARNING LIGHT OPERATES BUT FAILS TO ROTATE.
Step 1. Check for defective internal motor.
Replace motor (paragraph 4-122).
Step 2. Check for binding mechanism.
Disassemble, clean and reassemble as required.
33.
ROOF WARNING LIGHT OPERATES INTERMITTENTLY WHILE ROTATING.
Check if internal brush is too worn or corroded.
Clean or replace brush (paragraph 4-122).
34.
FRONT WARNING LIGHTS INOPERATIVE.
Step 1. Inspect for loose or burnt out bulbs.
Secure or replace bulbs.
Step 2. Inspect for loose connections.
Tighten connections.
Step 3. Inspect for blown fuse.
Replace fuse. If new fuse blows, check for short to ground in circuit between fuse and lights.
4-36
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals