 |
|||
|
|
|||
|
Page Title:
LUBRICATION INSTRUCTIONS - continued |
|
||
| ||||||||||
|
|
 TM 5-4210-224-14&P
4-9. LUBRICATION INSTRUCTIONS (Continued).
f. Brake System Lubrication.
(1) Fluid Level Check.
(a)
With a flat heat screwdriver, loosen
retaining clips (1) from reservoir (2).
(b)
Remove lid (3) from reservoir (2)
located near streetside rear of
engine.
(c)
Inspect fluid level.
(2) Adjusting Fluid Level. Fluid level in the
reservoir should be 1/4 inch below the
lowest edge of each filler opening.
Replace fluid as necessary. Replace lid
(3) and secure with retaining clips (1).
(3) Fluid Recommendations. Silicone brake
fluid which meets the requirement of
military specification MIL-B-46167 are
recommended (Appendix D, Item 4).
g. Front Axle Lubrication.
(1) Oil Level Check. Remove fill plug (1) on
front axle differential (2) and inspect front
axle fluid level.
(2) Adjusting Fluid Level. Fluid level in the
front axle differential should be level with
fill plug hole. Replace fluid necessary.
Replace fill plug (1). Torque to 18 ft-lbs
(25 N ).
m
(3) Fluid Recommendations.
Lubricating
gear oil which meets the requirements of
military specification MIL-L-2105C.
4-20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals