Table 2-2. Cab Controls and Instruments - continued

TM5--4210-224-14&P

Table 2-2. Cab Controls and Instruments

250 GPM Mini-Pumper Firefighting Truck (Continued)

(Refer to Figure 2-2)

Key

Control or Indicator

Function

Transmission Gear Selector.

The Transmission Gear Selector is used to shift the transmission gears

to the desired position.

The transmission gear selector is located on the transmission cove

mound at the center of the cab floor.

Hazard Warning Flasher Switch.

The Hazard Warning Flasher Switch is located on the right hand side of

the steering column and is used to warn other drivers any time your

vehicle becomes a traffic hazard.

To activate the system, push in the button (inside the collar) on the

steering column.

To turn off the flasher, pull the button collar out.

Combination Turn Signal/

The Combination Turn Signal/Washer/

Washer/Wiper Lever

Wiper Lever is located on the left side of the steering column. It also

controls the headlight low and high beams.

To activate the turn signal, move the lever up for a right turn and down

for a left turn. A green light on the instrument panel will indicate that the

signal lights are working.

2-15