|
| |
TM 5-4210-220-34
b.
Transmission Parts (Standard Size, New)
IN.
(1)
Flywheel Assembly
Max step wear, lockup backplate bore of flywheel .............................................................................
0.030
(2)
Torque Converter and Lockup Clutch
Piston - max face wear (plate contact area).......................................................................................
0.010
Plate - min thickness
.......................................................................................................................
0.190
Min depth of oil grooves .....................................................................................................................
0.008
Backplate - max face wear (plate contact area) ................................................................................
0.010
Stator assembly (TC 495):
roller thrust washer - min thickness ......................................................................................
0.022
front thrust washer - max inside diameter ............................................................................
4.016
front thrust washer - min thickness ......................................................................................
0.460
rear thrust washer - max inside diameter .............................................................................
4.018
Thrust bearing race - min thickness ..................................................................................................
0.029
Roller race - min outside diameter ....................................................................................................
3.998
(3)
Oil Pump Assembly
Body, gear, and cover:
Gear max end clearance between body ...............................................................................
0.006
and cover
(4)
Scavenge Oil Pump
Body, gear, and plate
Gear max end clearance between body ............................................................................................
0.007
and plate
(5)
Forward Clutch
External-tanged clutch plate:
Min thickness .......................................................................................................................
0.0993
Max cone
.......................................................................................................................
0.010
Internal-splined clutch plate - min thickness ......................................................................................
0.090
Min depth of oil grooves ....................................................................................................................
0.008
Fourth-clutch driving hub:
Min thickness, plate contact area .........................................................................................
0.390
(6)
Fourth-Clutch Assembly
Clutch backplate - min thickness .......................................................................................................
0.390
Internal-splined clutch plate - min thickness ......................................................................................
0.090
Min depth of oil grooves ....................................................................................................................
0.008
External-tanged clutch plate:
Min thickness .......................................................................................................................
0.0993
Max cone
.......................................................................................................................
0.010
(7)
Third Clutch, Center Support, Second Clutch
Third-clutch backplate - min thickness ..............................................................................................
0.490
Internal-splined clutch plate - min thickness ......................................................................................
0.1347
C-9
|
