|
| |
TM 5-4210-220-34
2-19.
ENGINE - Continued
2-19.11
Oil Pan
This task covers
a.
Removal
b.
Installation
TOOLS
MATERIALS/PARTS
Tool Kit, Master Mechanic,
10, Appendix B Dry Cleaning Solvent
NSN 5180-00-699-5273
17, Appendix B Engine Oil
29, Appendix B Threadlock Liquid
EQUIPMENT CONDITION
5117230 Oil Pan Gasket
Main Engine Shutdown (see TM 5-4210-220-12)
5125668 Oil Pan
APU Shutdown (see TM 5-4210-200-12)
Batteries Disconnected (see TM 5-4210-220-12)
Right Engine Compartment Cover Removed
(see TM 5-4210-220-12)
Front Heat Shield Removed
(see TM 5-4210-220-12)
REMOVAL
(1)
Remove the drain plug (1), and drain the
engine oil into a suitable container.
(2)
Remove the dipstick (2) from dipstick tube
(3).
(3)
Remove
the
capscrews
(4)
and
lockwashers (5).
(4)
Support the oil pan (6) and using a soft
faced hammer, tap the oil pan to loosen it
from the cylinder block.
(5)
Lower the oil pan from the cylinder block,
being careful not to damage the oil pump
piping and inlet screen.
(6)
Remove gasket (7) and discard. Ensure all gasket material is removed from cylinder block.
INSTALLATION
WARNING
Dry cleaning solvent P-D-680 (safety or Stoddard’s solvent) is potentially dangerous. Avoid repeated and prolonged
breathing of vapors and skin contact with the liquid. Do not use near open flame, arcing equipment or other ignition
sources. Always wear eye protection and protective clothing. The flash point of P-D-680 is 100 to 138 deg. F (30 to
59 deg. C).
(1)
Wash the oil pan and fasteners using dry cleaning solvent (item 10, Appendix B).
2-238
|
