|
| |
TM 5-4210-220-34
2-15.
WATER TANK ASSEMBLY - Continued
2-15.1 Water Tank - Continued
(16) Install water level sensor (11)
(17) Inspect old vibration isolators (13) and replace if required.
Place washers (6) on top of vibration isolators.
(18) Attach lifting equipment to water tank and lift the tanks onto the truck frame.
(19) Aline mounting holes in tank brackets with holes in vibration isolators and washers (6) and install attaching
hardware, items (3 thru 5, 7, and 8).
(20) Tighten nuts (3) until springs (5) are compressed to a length of 3.0 In. (76 mm). This will provide a spring pre-
load of approximately 370 lbs.
(21) Install winterization hoses (1 and 2) and remove crimps.
(22) Connect tank fill valve control air line (14) to fitting on rear face of water tank.
(23) Install water tank fill hose (12).
(24) Attach outlet piping (15) to foam tank.
2-142
|
