|
| |
TM 5-4210-220-12
4-21. EXHAUST SYSTEM - Continued
(3)
Attach both seal clamps (3) and four flat-band clamps (7) but do not tighten.
(4)
Push exhaust pipe up through the frame and attach flex tube to elbow weldment (2) with seal clamp (3).
Do not tighten.
(5)
Install muffler and tall pipe as detailed in para. 4-21.1.
(6)
Aline muffler pipe so that tube (11) fits into the muffler (12).
(7)
When alined, tighten four flat-band clamps (7) and two seal clamps (3) and turbocharger clamp (1) to 30
ft lb (41 Nm).
(8)
Tighten muffler clamps and support brackets to 30 ft lb (41 Nm).
(9)
Start engine and check for leaks. Tighten or remake joints as required.
(10)
Install remote handle on turret pipe drain valve.
4-337
|
