|
| |
TM 5-4210-220-12
4-18. PUMP, PIPING, AND VALVES - Continued
4-18 16 Roof Turret - Continued
e. Base and Body Repair - Continued
(24) Install capscrews (30) and washers (31)
and tighten to 15 ft lb (22 Nm).
(25) Install both O-rings (28) In the grooves of
the rotation bearing (27).
(26) Lower rotation bearing (27) into the base
(9) and push in until it contacts bearing
shoulder.
(27) Locate O-ring (29) on the chamfered
edge of the base (9).
(28) Lower the body (25) onto the base. Be
sure O-ring (29) is not disturbed when
the body is installed.
4-274
|
