|
| |
TM 5-4210-220-12
4-18. PUMP, PIPING, AND VALVES - Continued
4-18 16 Roof Turret - Continued
c. Nozzle Repair - Continued
(26) Apply threadlock liquid (item 29, Appendix E) to the button shaft threads (17) and install lockwasher
(19) and jam nut (18). Tighten jam nut firmly.
(27) Lubricate O-ring (13) with silicone grease (item 27, Appendix E) and install into groove on housing (10).
(28) Slide the sleeve (11) onto the housing (10) until it contacts the shoulder. Be sure to align scribe marks.
(29) Lubricate O-ring (8) using silicone grease (item 27, Appendix E) and install into groove on tip flange (9).
(30) Lift nozzle assembly (7) up to head (6). Be sure to install the cable end (3) into the sleeve boss. Install
lockwasher (2) and nut (1) and tighten firmly.
(31) Attach the nozzle assembly (7) to the head (6) using lockwashers (5) and capscrews (4). Tighten to 15
ft lb (22 Nm).
(32) Adjust control cable following steps 20 thru 26 of Control Cable Repair preceding.
4-268
|
