|
| |
TM 5-4210-220-12
4-18. PUMP, PIPING, AND VALVES-Continued
(4)
Install elbow (3) into reducer (4). Be sure elbow orientation is as shown.
(5)
Remove eductor (6) from vise and install into suction tee fitting (7) in orientation shown.
(6)
Install elbow assembly (8) into eductor (6) in orientation shown.
(7)
Install hose end (2) onto elbow (3) and tighten firmly.
(8)
Install check valve as detailed in para. 4-18.14.
(9)
Replace box rear plate (C).
(10)
Install equipment into compartment box.
(11)
Start firefighting foam system as detailed in para. 2-11. Tighten/remake any leaking connections
4-259
|
