TM 5-4210-220-12 4-16.  HOSE BODY - Continued 4-16 3 Compartment Door - Continued (4) Inspect     hinges     for     cracks,     oversized mounting holes, or for excessive hinge pin movement. (5) If   any   damage   is   evident   replace   the hinge. (6) Install hinge into position on the compartment door and aline the mounting holes.    Install  one  capscrew  through  the hinge   and   fingertighten   into   the   insert fastener. (7) Install capscrews and locknuts that fasten the    hinge    to    the    compartment    door. Tighten locknuts securely. (8) Install remaining hinges similarly to steps 6 and 7 preceding. (9) Lift the compartment door (5) into position.   Aline the holes in the hinges (3) with the holes in the compartment box (4) and   install   the   capscrews   (1)   and   new locknuts (2) The left hand upper compartment doors have three hinges. (10) Adjust compartment door striker as described  in  Striker  and  Bracket  Repair following. (11) Apply white grease (Item 34, Appendix E) to lubricate the hinge. b  Handle Repair. NOTE The   handle   cannot   be   repaired, replace if damaged. (1) Remove the four capscrews (1) that retain the  handle  (2)  to  the  compartment  door (3). (2) Using  a  flat  screwdriver,  pry  handle  free of  seal  bond  with  door.    Left  hand  upper compartment doors have two handles. 4-198