|
| |
TM 5-4210-220-12
4-14. HOSE REEL ASSEMBLY - Continued
4-14.2 Hose Reel - Continued
b.
Reel Motor Replacement.
(1)
Remove ground screw (14) attaching motor lead (-) to frame. Remove motor lead (+) from solenoid
(15). Remove ties attaching leads to frame member.
(2)
Remove chain connecting link (8) and remove chain (2) from motor (10).
(3)
Remove locknuts and capscrews (9), and motor (10).
(4)
Inspect new motor to be sure it is not damaged from handling and shipping.
(5)
Install a new motor (10) using capscrews and locknuts (9). Do not tighten bolt.
(6)
Wrap chain (2) around motor sprocket and assemble using connecting link (8).
(7)
Slide motor forward until chain is properly tensioned (1/2 in. (13 mm) deflection midway between reel
and motor sprockets). Tighten capscrews and locknuts (9) to 20 ft lb (25 Nm).
4-136
|
