|
| |
TM 5-4210-220-12
4-12. CAB - Continued
4-12 9 Seat - Continued
INSTALLATION
a. Front Seat Installation
(1) Install seat on seat risers using screws (5),
washers (6), and locknuts (7). Tighten to
22 ft lb (29 Nm).
(2) Install seat belts (3) and, on drivers seat
only, tether straps (4) using screws (1) and
lockwashers (2). Tighten screws to 22 ft lb
(29 Nm).
b. Rear Seat Base Installation
(1) Install seat (2) using nuts (1). Tighten to
22 ft lb (29 Nm).
(2) Install seat belt (5) using screws (3) and
lockwashers (4). Tighten to 22 ft lb (29
Nm).
c. Rear Seat Back Installation
(1) Align seat back with cab side and engine
compartment mounting holes.
(2) Install screws (5), washers (6) and nuts (7).
Tighten securely.
(3) Align breathing air set bracket (4) and
retain with screws (1), washers (2), and
nuts (3).
(4) Install breathing air set.
4-112
|
