|
| |
TM 5-4210-220-12
4-12. CAB - Continued
4-12.1 Cab Mirror - Continued
c
Convex Mirror And Clamp Repair
(1)
Remove nut (1) attaching mirror (2) to clamp arm (3).
(2)
Install new mirror (2) to clamp arm using new locknut (1).
NOTE
If both mirror and clamp arm are to be replaced, carry out steps 3, 4, and 2 in this order.
(3)
Remove screws (4) and nuts (5) and discard components (1) thru (6).
(4)
Assemble new clamps (6) and clamp arm (3) to mirror arm (7) using new screws (4) and nuts (5).
4-82 /(4-83 Blank)
|
