|
| |
TM 5-4210-220-12
4-11 HEAT SHIELDS - Continued
(4)
Remove the capscrews that retain the pump body heat shield to the front heat deflector.
(5)
While supporting the pump body heat shield (2), remove the four corner capscrews (1) and lower pump
body heat shield to the ground.
INSTALLATION
(1)
Apply sealant (item 25, Appendix B) to the perimeter of each mating surface during assembly.
(2)
Slide the pump body heat shield (2) under the truck. Raise the heat shield into place and support it.
(3)
Install capscrews (1) attaching the pump body heat shield (2) to the pump body side sheet (3) and tighten
to 8 ft lb (11 Nm).
(4)
Install the capscrews that retain the pump body heat shield to the hose body heat shield.
(5)
Install the capscrews that retain the front heat deflector to the pump body heat shield.
REPAIR
NOTE
Repair pump body heat shield as detailed in para. 4-11.1 REPAIR.
4-77
|
