| |
TM 5-4210-220-12
Table 3-1. OPERATOR TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14a WHEEL STEERING HARD IN ONE OR BOTH DIRECTIONS
Check tire pressures.
Inflate tires to correct pressure, 70 psi (480 kPa).
14b ERRATIC STEERING OR NO STEERING AT ALL
Check steering pump drive belt tension.
Refer to Organizational Maintenance.
15 TRANSMISSION OVERHEATING
Step 1. Check if low oil level.
Refer to Organizational Maintenance.
Step 2. Check engine coolant level.
Add coolant as required.
Step 3. Check if gear range selected too high.
Select lower gear
.
16a STARTER WILL NOT CRANK MAIN ENGINE
Step 1. Check battery switch set to BOTH.
Set battery switch to BOTH.
Step 2. Check ignition switch ON.
Set ignition switch to ON.
16b ENGINE CRANKS BUT WILL NOT START
Step 1. Check fuel gage.
Fill fuel tank as required.
Step 2. Prime fuel system.
Push prime switch for 10-20 seconds.
3-9
|