|
| |
TM 5-4210-218-13&P
4-23 AIR FILTER / REGULATOR ,ASSEMBLY REPLACEMENT. (Refer to Figure 4-16)
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Equipment Condition
Tools
Reference
General Mechanics Tool Box, Item 1, Section
Cover removed from Recovery / Recharger
III, Appendix B.
Unit; paragraph 2-6.1
Materials/Parts
Air supply disconnected, paragraph 2-7
Self-locking nuts
Air Filter / Regulator
NOTE
Assembly comes loose with next step.
4-23.1 Removal.
a.
Remove two nuts (1), washers (2), and one clamp (3). Discard nuts.
b.
Remove two bolts (4) and washers (5).
c.
Disconnect air outlet hose (6).
d.
Remove air inlet hose connection (7). Retain for reuse.
4-23.2 Installation.
a.
Install air inlet hose connection (7).
b.
Position new assembly and install two washers (5), bolts (4), one clamp (3), two washers (2) and nuts (1).
c.
Reconnect air outlet hose (6).
4-34
|
