|
| |
TM 5-4210-218-13&P
d.
Install adapter and refer to paragraph 2-9 of operating instruction to pressurize to test for leaks using leak
detector (Appendix E).
4-19.2 Bradley Engine Compartment Extinguisher Adapter Repair. (Refer to Figure 4-12)
4-19.2.1 Flare Swivel Adapter Replacement.
4-19.2.1.1 Removal.
a.
Holding nipple (1) securely, unscrew swivel adapter (2) from nipple and set aside for disposal.
b.
Clean any remaining antiseize tape from nipple threads.
4-19.2.1.2 Installation.
a.
Check new swivel adapter for defects.
b.
Wrap nipple (1) threads with one layer of antiseize tape (item 3, Section II, Appendix F).
c.
Holding nipple securely, screw new swivel adapter on nipple and tighten securely.
d.
Install adapter and refer to paragraph 2-9 of operating instructions test for leaks using leak detector
(Appendix E).
4-19.3 Quick Disconnect Plug Replacement.
4-19.3.1 Removal.
a.
Holding nipple (1) securely, unscrew quick disconnect plug (3) from nipple and discard.
b.
Clean any remaining antiseize tape from nipple threads.
4-19.3.2 Installation.
a.
Check new quick disconnect plug (3) for defects.
b.
Wrap nipple (1) threads with one layer of antiseize tape (item 3, Section II, Appendix F).
c.
Holding nipple securely, screw new quick disconnect plug (3) on nipple and tighten securely.
d.
Install adapter and refer to paragraph 2-9 of operating instructions to check for leaks using leak detector
(Appendix E).
4-27
|
