(3) Replace    or    repair    damaged    parts    as necessary. c. Installation.    Refer  to  figure  3-5  and  install  the fire extinguisher bracket on the rear step. 3-30.  Rear Step a. Removal. (1) Remove    the    fire    extinguisher    bracket (pare 3-29). (2) Remove   the   side   handrails   and   panels (fig.  3-5?. (3) Refer  to  figure  3-5  and  remove  the  rear step from the special purpose body. b. Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent and dry thoroughly. (2) Inspect all parts for damaged or defective parts as necessary. c.  Installation. (1) Refer   to   figure   3-5   and   install   the   rear step on the special purpose body. (2) Install  the  side  handrails  and  panels  (fig. 3-5). (3) Install  the  fire  extinguisher  bracket  (pare 3-29). 3-31.  Shovel Brackets a. Removal.    Refer  to  figure  3-5  and  remove  the shovel brackets from apron. b. Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent, and dry thoroughly. (2) Inspect all parts for damaged or defective condition. (3) Replace  or  repair  damaged  or  defective parts as necessary.  : c. Installation.    Refer  to  figure  3-5  and  install  the shovel bracket on the apron. 3-32.  Ladder Support Assemblies a. Removal.    Refer  to  fig.    3  -  and  remove  the ladder   support   assemblies   from   the   special   purpose body. b.  Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent, and dry thoroughly. (2) Inspect all parts for damaged or defective condition. (3) Replace  or  repair  damaged  or  defective parts. c. Installation.      Refer   to   fig.      3-6   and   install the  ladder  support  assemblies  on  the  special  purpose body. 3-33.  Foam Nozzle Retainer a. Removal.    Refer  to  fig.    3-6  and  remove  the foam nozzle retainer from the apron. b. Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent, and dry thoroughly. (2) Inspect all parts for damaged or defective condition. (3) Replace  or  repair  damaged  or  defective parts as necessary. c. Installation.    Refer  to  fig.    3-6  and  install  the foam nozzle retainer on the apron. 3-34.  Hose Retainer a. Removal.    Refer  to  figure  3-6  and  remove  the hose retainer from the apron. b. Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent, and dry thoroughly. (2) Inspect all parts for damaged or defective condition. (3) Replace  or  repair  damaged  or  defective parts as necessary. c. Installation.    Refer  to  figure  3-6  and  install  the hose retainer on the apron. 3-35.  Folding Steps a. Removal.    Refer  to  figure  3-6  and  remove  the folding steps from the special purpose body. Note Remove  folding  steps  from  pump and   hose   reel   compartment   in   a similar manner. b. Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent, and dry thoroughly. (2) Inspect all parts for damaged or defective condition. (3) Replace  or  repair  damaged  or  defective parts as necessary. c. Installation.    Refer  to  figure  3-6  and  install  the folding steps on the special purpose body. 3-36.  Splash Guards a. Removal.    Refer  to  figure  3-7  and  remove  the splash guards from the truck chassis. b. Cleaning, Inspection, and Repair. (1) Clean all parts with an approved cleaning solvent, and dry thoroughly. (2) Inspect all parts for damaged or defective condition. 3-13