|
| |
c.
Installation.
(1)
Refer to figure 3-37, and install the
discharge pressure gage on the pump gage panel.
(2)
Refer to figure 3-29, and install the cover.
3-82. Vacuum and Hydrant Pressure Gage
a.
Removal.
(1)
Refer to figure 3-29, and remove the c
over.
(2)
Refer to figure 3-37, and remove the
hydrant pressure gage from the pump gage panel.
b.
Cleaning, Inspection, and Repair.
(1)
Clean with an approved cleaning solvent,
and dry thoroughly.
(2)
Inspect all parts for damaged or defective
condition.
(3)
Replace or repair damaged or defective
parts as necessary.
c.
installation.
(1)
Refer to figure 3-37, and install the
vacuum hydrant pressure gage on the pump gage
panel.
(2)
Refer to figure 3-29, and install the cover.
3-83. Pump Gage Control Panel
a.
Removal.
(1)
Remove the tachometer-hour meter (para
3-80).
(2)
Remove the vacuum hydrant pressure
gage (para 3-82).
(3)
Discharge pressure gage (para 3-81).
(4)
Refer to figure 33-7, and remove the
pump gage control panel from the special purpose body.
b.
Cleaning, Inspection, and Repair.
(1)
Clean with an approved cleaning solvent,
and dry thoroughly.
(2)
Inspect
for
damaged
or
defective
condition.
(3)
Replace or repair as necessary.
c.
Installation.
(1)
Refer to figure 3-37, and install the pump
gage panel on the special purpose body.
(2)
Install the discharge pressure gage (para
3-81).
(3)
Install the hydrant pressure gage (para 3-
82).
(4)
Install the tachometer-hour meter (para 3-
0).
3-84. Apron
a.
Removal.
(1)
Remove the rear step (para 3-30).
(2)
Remove the hose retainers (para 3-33
and 3-34).
(3)
Remove the receptacles (para 3-75).
(4)
Remove the shovel bracket (para 3-31).
(5)
Remove the folding step (para 3-35).
(6)
Refer to figure 3-38, and remove the
apron from the special purpose body.
b.
Cleaning, Inspection, and Repair.
(1)
Clean with a clean cloth dampened in an
approved cleaning solvent, and dry thoroughly.
(2)
Inspect
for
damaged
or
defective
condition.
(3)
Replace or repair as necessary.
c.
Installation.
(1)
Refer to figure 3-38, and install the apron
on the special purpose body.
(2)
Install the folding step (para 3-35).
(3)
Install the shovel bracket (para 3-31).
(4)
Install the receptacles (para 3-75).
(5)
Install the hose retainers (para 3-33 and
3-45).
(6)
Install the rear step (para 3-30).
3-85. Pump Compartment Panel
a.
Removal. Refer to figure 3-39, and remove the
pump compartment panel from the pump compartment.
b.
Cleaning, Inspection, and Repair.
(1)
Clean with an approved cleaning solvent,
and dry thoroughly.
(2)
Inspect damaged or defective condition.
(3)
Replace or repair as necessary.
c.
Installation. Refer to figure 3-39, and install the
pump compartment panel on the pump compartment.
3-49
|
