|
| |
3-43. Battery Box
a.
Removal. Refer to figure 3-13, and remove the
battery box from the truck chassis.
b.
Disassembly. Refer to figure 3-14 and
disassemble the battery box. - -
c.
Cleaning, Inspection, and Repair.
(1)
Clean all parts with an approved cleaning
solvent, and dry thoroughly.
(2)
Inspect all parts for damaged or defective
condition.
(3)
Replace or repair damaged or defective
parts.
d.
Reassembly. Refer to figure 3-14 and
reassemble the battery box in reverse order.
e.
Installation. Refer to figure 3-13 and install the
battery box on the truck chassis.
Section IX. FUEL SYSTEM
3-44. General
The fuel system consists of a manually operated throttle
control that is located on the lower left side area of the
left pump operator's control panel. It provides means of
changing engine speed other than by the use of controls
in the cab.
3-45. Throttle Control and Linkage
a.
Removal. Refer to figure 3-15, and remove the
throttle control and linkage from the: engine and
instrument panel.
b.
Cleaning and Inspection.
(1)
Clean all parts with a clean cloth
dampened in an approved cleaning solvent, and dry
thoroughly.
(2)
Inspect all parts for damaged or defective
condition.
(3)
Replace or repair damaged or defective
parts as necessary.
c.
installation. Refer to figure 3-15 and install the
throttle control and linkage on the engine and instrument
panel.
Section X. AIR SYSTEM
3-46. General
This section consists of the various fittings and tubing
which connect the air brake system to the air tanks.
3-47. Air Tank Tubing and Fittings
a.
Removal. Refer to figure 3-16 and remove the
air tank tubing and fittings from the unit.
b.
Cleansing, Inspection, and Repair
(1)
Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2)
Inspect all parts for damaged or defective
condition.
(3)
Replace or repair damaged or defective
parts as necessary.
c.
Installation. Refer to figure 3-16, and install the
air tank tubing and fittings on the unit. -
3-15
|
