|
| |
TM 10-4210-235-13
(9)
Install link (5), cable (15), clamp (4), two screws (3), and new lock nuts (2).
(10)
Install tires/wheels (para 4-28).
d.
Adjustment (See figure 4-32.)
NOTE
Brakes are properly adjusted when set on (down/horizontal), the tires will skid on dry
pavement when equipment is towed in either direction. If brakes cannot be adjusted to this
point, they must be replaced.
(1)
Secure unit from moving and release parking brakes (1) (up/vertical).
(2)
Remove set screw (2).
(3)
Adjust brakes by turning knob (3) clockwise to tighten or counterclockwise to loosen.
(4)
Check brakes as noted and adjust if necessary.
(5)
Secure knob (3) from turning using set screw (2) and set brakes (1) on (down/horizontal).
Figure 4-32. Parking Brake Adjustment
4-71
|
