|
| |
TM 10-4210-235-13
4-24. AFFF TANK REPLACEMENT AND REPAIR. - continued
Figure 4-25. AFFF Tank Assembly Removal
b.
Disassembly (See figure 4-26 )
(1)
Break two strip ties (1) and pull two retaining clips (2).
(2)
Remove two screws (3) and valve mounting bracket (4).
(3)
Remove two screws (3) and valve mounting bracket (5).
(4)
Slip cable (6) off each retaining clip (2).
(5)
Cut cable (6) from valve mounting brackets (4) and (5). Discard cables.
(6)
Disconnect elbow (7), nipple (8), check valve (9), and nipple (10)
(7)
Separate union (11) halves
(8)
Disconnect union (11) half, nipple (12), tee fitting (13), nipple (14), ball valve (15), nipple (16), elbow (17),
nipple (18), pressure relief valve (19), tee fitting (20), and nipple (21).
4-58
|
