|
| |
TM 10-4210-235-13
4-21. LIFT BAR REPAIR.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP:
Tools
Materials/Parts
General Mechanics Tool Kit, Appendix B, Section III,
Lock Washers (8), Appendix H, item 3
item 1
Cotter Pins (2), Appendix H, item 4
a.
Removal (See figure 4-18.)
Remove eight nuts (1), lock washers (2), beveled washers (3), screws (4), and flat washers (5). Carefully
lift posts (6) off unit. Discard lock washers
b.
Repair
NOTE
Repair is limited to replacement of defective or damaged components only
(1)
Remove cotter pins (7). Carefully remove posts (6) from lift bar (8). Discard cotter pins.
(2)
Insert lift bar (8) into posts (6) and install new cotter pins (7)
c.
Installation
Carefully place posts (6) onto unit and align mounting holes. Install eight screws (4), flat washers (5),
beveled washers (3), new lock washers (2), and nuts (1).
4-43
|
