|
| |
TM 10-4210-235-13
(7)
Install gear (15) and eight screws (14) onto disc (18).
(8) Carefully slide bearings (13) onto distributor (2) ends. Place spool (21) assembly onto frame (22) and align
bearing mounting holes.
(9) Install four screws (12), eight flat washers (11), four new lock washers (10), and nuts (9)
(10)
Lubricate new preformed packing (7) and (8) with grease and install onto tailpiece (1).
(11)
Carefully slip tailpiece (1) into elbow (6).
(12)
Install lubrication fitting (4)
(13)
Install 30 ball bearings (5)
(14)
With setscrew (3) removed, lubricate with grease through lubrication fitting (4) until grease comes out open
hole. Install setscrew.
(15)
Wrap antisieze tape around distributor (2) threaded ends and connect two tail pieces (1)
e.
Installation (See figure 4-15.)
WARNING
Lifting the hose reel assembly by yourself can result in serious personal injury.
(1) Using two personnel, carefully place frame (11) on unit or cart as applicable and align mounting holes.
(2)
Install four screws (3), flat washers (4), new lock washers (2), and nuts (1) for trailer mounted extinguisher
assembly.
(3) Install four U-bolts (10), eight new lock washers (9), and nuts (8) for auxiliary mobile hose reel cart.
(4)
Install two J-bolts (7), flat washers (6), and nuts (5) for auxiliary mobile hose reel cart.
(5)
Install rewind brake assembly per paragraph 4-20.
(6)
Install hose roller assembly per paragraph 4-18 for trailer mounted extinguisher assembly (7) Install fire
hose per paragraph 4-17 (8) Install bracket and nozzles per paragraph 4-14 (9) Install installation tool per
paragraph 4-13 for trailer mounted extinguisher assembly.
(10)
Install gage case from trailer mounted hose reel per paragraph 4-13 for trailer mounted extinguisher
assembly (11) Install crank per paragraph 4-13.
(12)
Install discharge hoses per paragraph 4-15 and 4-31
4-41
|
