|
| |
TM 10-4210-235-13
(c)
Disconnect fitting (6) from elbow (9)
(d)
Disconnect elbow (9) from hose assembly (5)
(3)
Remove charging hose assembly (10) if damaged.
(a)
Disconnect fitting (11) from regulator swivel adapter (12)
(b)
Disconnect fitting (13) from tank check valve
(4)
Remove charging bypass hose assembly (14) or discharge bypass hose assembly (15) if damaged
(a)
Disconnect fitting (15) from swivel adapter
(b)
Disconnect fitting (16) from tee fitting.
b.
Installation
(1)
Install discharge hose assembly (1) if removed.
(a)
Wrap Antisieze tape around threaded fitting (4).
(b)
Connect fitting (4) to discharge valve elbow.
(c)
Install new neoprene washer (3) into fitting (2).
(d)
Connect fitting (2) to hose reel swivel elbow.
(2)
Install system cylinder hose assembly (5) If removed
(a)
Connect elbow (9) to hose assembly (5)
(b)
Connect fitting (6) to elbow (9)
(c)
Connect fitting (7) to regulator elbow (8).
(d)
Connect fitting (6) to system cylinder valve.
(3)
Install charging hose assembly (10) if removed.
(a)
Wrap Antisieze tape around threaded fitting (13)
(b)
Connect fitting (13) to tank check valve.
(c)
Connect fitting (11) to regulator swivel adapter (12)
(4)
Install charging bypass hose assembly (14) or discharge bypass hose assembly (15) if removed.
(a)
Connect fitting (16) to tee fitting.
(b)
Connect fitting (15) to swivel adapter.
4-27
|
