 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4931-363-14&P
position R2, the R2 output of the test set resolver is
table. Setting S9 to position R3 connects the R3 output of
connected to the meter and A2 card.
the test set resolver to the meter and A2 card for readout.
an. Refer to step 39 in figure 2-6 and in the EIA test
table. Setting S9 to position R3 connects the R3 output of
the test set resolver to the meter and A2 card for readout.
table. A ground is connected through wiper 1 and contact
12 of S8-B, through J1-v, through J2-P, and through J7-2 to
ao. Refer to step 40 in figure 2-6 and in the EIA test
relays K1, K2, and K3 in buffer amplifier A3 in the EIA.
table. Setting S3 to position 7 connects the excitation
The energized relays apply fixed inputs to the buffer
inputs to buffer amplifier A6 in the HA. With S9 set to
amplifier and connect its output to the test resolver in the
position R2, the R2 output of the test set resolver is
EIA. The R2 output from the EIA test resolver is
connected to the meter and A2 card.
connected through J2-R, through J1-P, through contact 2
and wiper 1 of S4-1, and through contacts 2 and 3 of S9 to
Refer to step 41 in figure 2-6 and in the EIA test
up.
the meter and A2 card for readout.
table. Setting S9 to position R3 connects the R3 output of
the test set resolver to the meter and A2 card for readout.
table. With S9 set to position R3, the R3 output from the
aq. Refer to step 42 in figure 2-6 and in the EIA test
table. Setting S3 to position 8 connects the excitation
EIA test resolver is connected through J2-S, through Jl-H,
inputs to buffer amplifier A8 in the HA. With S9 set to
through contact 2 and wiper 1 of S4-1, and through
~sition R2, the R2 output of the test set resolver is
contacts 1 and 3 of S9 to the meter and A2 card for
readout.
connected to the meter and A2 card.
2-21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals