DISASSEMBLY - Continued
Read and follow all WARNINGS in the WARNING SUMMARY in the front of this
manual. Pay careful attention to those concerning batteries (M137A2/M137A3 only).
Remove machine screw (18), lockwasher (19), retaining strap (20), two protective cap-plugs (21), and
two batteries (22) from battery box (23). If damaged, remove retaining strap from protective cap-plugs
Remove four machine screws (24) and four lockwashers (25) (M137A2/M137A3 only).
Use extreme care when removing battery box. A short wire harness and connector
on the battery box are connected to a connector on a short wire harness that passes
through the adapter plate on the counter box assembly. These connectors and wire
harnesses are easily damaged (M137A2/M137A3 only).
Carefully remove battery box (23) and disconnect connector (26) from connector (27) (M137A2/M137A3
Do not attempt to remove adapter plate between the battery box and the counter box
assembly. The wire harness passing through the adapter plate cannot be removed
without damaging the equipment. The adapter plate can only be removed or
installed by the manufacturer (M137A2/M137A3 only).
Remove gasket (28) from adapter plate (29) on counter box assembly (5). Discard gasket