 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0082 00
6.
If torque requirements cannot be met, loosen two setscrews (4 and 5). Tighten or loosen externally
threaded ring (6) or machine thread plug (7).
9
5
4
8
7
6
1 fc 5 6 1
1 fc 5 6 2
7.
Install new lock wire (8) (item 21, WP 00 0152 00) and setscrew (4) and tighten setscrew, making sure
lock wire is attached so that tension is applied if machine thread plug (7) attempts to loosen.
WARNING
Use sealing compound in well-ventilated area away from open flame. Sealing
compound is harmful to skin and clothing and may give off harmful vapor. Exercise
care whenever sealing compound is used.
8.
Apply sealing compound (item 13, WP 00 0152 00) and tighten setscrew (4).
9.
Apply sealing compound (item 13, WP 00 0152 00) to sharp ends of lock wire (8).
10.
Install new lock wire (9) (item 21, WP 00 0152 00) and setscrew (5), making sure lock wire is attached
so that tension is applied if externally threaded ring (6) attempts to loosen.
11.
Apply sealing compound (item 13, WP 00 0152 00) and tighten setscrew (5).
12.
Apply sealing compound (item 13, WP 00 0152 00) to sharp ends of lock wire (9).
END OF WORK PACKAGE
0082 00-11/12 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals