 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0046 00
8.
If removed, install new cushioning pad (10) and new setscrew (11) to fire control level assembly (12).
Do not tighten setscrew.
9.
Install adjusting plate (9) on fire control level assembly (12).
10.
Install four new lockwashers (13) (item 4, WP 0111 00) and four machine screws (14). Tighten machine
screws and fill heads with sealing compound (item 13, WP 0152 00).
11.
Start screw (15) into adjusting plate (9) but do not tighten. Screw will be tightened and locked with
setscrew (11) during adjustment (WP 0048 00).
12.
Apply sealing compound (item 13, WP 0152 00) to threads of two machine screws (16).
13.
Install reflector (17) with two new lockwashers (18) (item 4, WP 0111 00) and two machine screws (16).
Tighten machine screws.
14.
Apply sealing compound (item 13, WP 0152 00) to threads of two machine screws (19).
15.
Install reflector (20) with two new lockwashers (21) (item 9, WP 0111 00) and two machine screws (19).
Tighten machine screws (M18 only).
27
30
30
22
27
29
28
29
25
28
24
23
23
25
26
26
24
1 fc 0 6 9
22
1 fc 0 7 0
M17 Quadrant
M18 Quadrant
16.
If removed, apply sealing compound (item 13, WP 0152 00) to threads of two machine screws (22).
17.
If removed, install identification plate (23), two new lockwashers (24) (item 13, WP 0111 00), and two
machine screws (22) on quadrant (25).
18.
If removed, install new instruction plate (26) on quadrant (25).
19.
If removed, apply sealing compound (item 13, WP 0152 00) to threads of four machine screws (27).
20.
If removed, install two new instruction plates (28 and 29) on side of quadrant (25) using four new
lockwashers (30) (item 13, WP 0111 00) and four machine screws (27).
21.
Perform fire control level assembly adjustment maintenance (WP 0048 00).
22.
Purge and charge M17/M18 fire control quadrant (TM 750-116).
END OF WORK PACKAGE
0046 00-7/8 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals