BATTERY PACK BT-34 REPLACEMENT

TM 55-1925-292-14&P

0026 00

INSTALLATION

1. Position the battery charger/transfer module BC-35 (figure 6, item 5) in the enclosure and secure it with the

four screws (figure 6, item 4).

2. Connect the electrical wiring to P1 (figure 6, item 1), P2 (figure 6, item 2), and TB1 (figure 6, item 3) using the

labels from step 2 of Removal as a guide. Remove the labels.

3. Perform the Follow-On Service procedure at the end of this work package.

BATTERY PACK BT-34 REPLACEMENT

REMOVAL

1. OPEN the enclosure following the Open Enclosure procedure of this work package.

2. Label and disconnect the electrical wiring from the terminal block (figure 7, item 1).

3. Remove the six screws (figure 7, item 2) that secure the battery pack BT-34 (figure 7, item 3), and remove it

from the enclosure.

CP-35

PS 35

MM-35

BE-35

BC-35

Figure 7. Battery Pack BT-34 Replacement

0026 00-8