Quantcast INSTALLATION - TM-55-1925-292-14-P0189

 

Click here to make tpub.com your Home Page

Page Title: INSTALLATION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Figure 1. Typical Fire Station
Up
TM-55-1925-292-14-P Firefighting Fire Alarm and Fire Suppression Systems Inland and Coastal Large TUG (LT) Manual
Next
TYPICAL FLANGED BALL VALVE REPLACEMENT
TM 55-1925-292-14&P
0016 00
INSTALLATION
1. Install a new gasket (figure 1, item 6) in the female coupling (figure 1, item 7) of the fire hose (figure 1, item 4).
2. Attach the fire hose (figure 1, item 4) to the fire hose adapter (figure 1, item 5). Tighten the connection using
the spanner wrench (figure 1, item 1).
3. Perform the Nozzle Replacement Installation procedure in this work package.
4. Perform the Follow-On Service procedure at the end of this work package.
GASKET REPLACEMENT
REMOVAL
1. Use the spanner wrench (figure 1, item 1) to remove the female coupling (figure 1, item 7) of the fire hose
(figure 1, item 4) from the fire hose adapter (figure 1, item 5).
2. Remove the gasket (figure 1, item 6) from the female coupling (figure 1, item 7) of the fire hose (figure 1,
item 4). Discard the gasket.
INSTALLATION
1. Install a new gasket (figure 1, item 6) in the female coupling (figure 1, item 7) of the fire hose (figure 1,
item 4).
2. Using the spanner wrench (figure 1, item 1), tighten the female coupling (figure 1, item 7) to the fire hose
adapter (figure 1, item 5).
3. Perform the Follow-On Service procedure at the end of this work package.
FIRE HOSE ADAPTER REPLACEMENT
REMOVAL
1. Perform the Fire Hose Replacement Removal procedure in this work package.
2. Use the spanner wrench (figure 1, item 1) to loosen the fire hose adapter (figure 1, item 5) from the cutoff
valve (figure 1, item 8).
3. Remove the gasket (figure 1, item 9) from the fire hose adapter (figure 1, item 5). Discard the gasket.
INSTALLATION
1. Install a new gasket (figure 1, item 9) in the new fire hose adapter (figure 1, item 5).
2. Use the spanner wrench (figure 1, item 1) to tighten the fire hose adapter (figure 1, item 5) onto the cutoff
valve (figure 1, item 8).
3. Perform the Fire Hose Replacement Installation procedure in this work package.
4. Perform the Follow-On Service procedure at the end of this work package.
0016 00-3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +