Quantcast FIREFIGHTING SYSTEM, REPAIR - TM-55-1925-292-14-P0187

 

Click here to make tpub.com your Home Page

Page Title: FIREFIGHTING SYSTEM, REPAIR
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Chapter 6. Unit Maintenance Instructions
Up
TM-55-1925-292-14-P Firefighting Fire Alarm and Fire Suppression Systems Inland and Coastal Large TUG (LT) Manual
Next
Figure 1. Typical Fire Station
TM 55-1925-292-14&P
UNIT MAINTENANCE
FIREFIGHTING, FIRE ALARM, AND FIRE SUPPRESSION SYSTEMS FOR
INLAND AND COASTAL LARGE TUG (LT)
FIREFIGHTING SYSTEM, REPAIR
INITIAL SETUP:
References:
Tools and Special Tools:
FM 55-502
Tool Kit, General Mechanic's (Item 1, Table 2,
TB 43-0218
Suitable Drain Pan
Materials/Parts:
Dry Cleaning Solvent (Item 2, Table 1,
Equipment Conditions:
Gloves, Chemical and Oil Protective (Item 7,
Set to OFF the FIRE PUMP # 1 circuit breaker on
Table 3, WP 0049 00)
the emergency switchboard. Lock out and tag
Goggles, Industrial (Item 9, Table 3,
out (FM 55-502).
Set to OFF the FIRE PUMP NO. 2 circuit breaker on
Tag, Danger (Item 8, Table 1, WP 0050 00)
the main switchboard. Lock out and tag out
(FM 55-502).
Tape, Antiseizing (Item 9, Table 1, WP 0050 00)
Personnel Required:
Two Watercraft Engineers, 88L
WARNING
Never reuse locking hardware. Reuse of locking hardware such as lockwashers,
locking nuts, cotter pins, and lockwire can result in undetected loosening of fas-
tening hardware causing catastrophic component failure resulting in death, in-
jury, or damage to equipment. In accordance with TB 43-0218, ensure that all
locking hardware is discarded upon removal and replaced with new.
NOZZLE REPLACEMENT
REMOVAL
1. Use the spanner wrench (figure 1, item 1) located on the storage rack (figure 1, item 2) to loosen the nozzle
(figure 1, item 3) from the fire hose (figure 1, item 4).
2. Remove the nozzle (figure 1, item 3) from the fire hose (figure 1, item 4).
0016 00-1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +